Cronyx E1 - L/S, Руководство по установке и эксплуатации

Страница: 15 / 52

© 2006 Cronyx
1
Section 2. Installation
Digital Port (V.35) Connector
The M-34 (female) connector is provided for connection cable to the V.35 («-V» version)
digital interface port:
Pin Signal Direction
P TD-a Input
S TD-b Input
R RD-a Output
T RD-b Output
U ET-a Input
W ET-b Input
Y TC-a Output
AA TC-b Output
BB ERC-a Input
Z ERC-b Input
V RC-a Output
X RC-b Output
C RTS Input
H DTR Input
E DSR Output
D CTS Output
F DCD Output
A CGND —
B SGND —
Console Port Connector
Device operation may be controlled from the ASCII terminal (the console). DB-9 (fe-
male) connector is used to connect the console. Console port has a standard RS-232
DCE interface and should be used in asynchronous operating mode, 9600 bps rate, 8 bit
per character, 1 stop bit, no parity. Use straight cable to connect to the computer COM
port.
An RTS signal (for flow control) from the console terminal is required for
proper operation.