Please read this guide entirely
for instructions, guidelines and warnings before using your CritterZone.
GENERAL INFORMATION
Please read all tips and warnings before using your CritterZone,
and use only as directed within this User Guide.
CritterZone is designed to run continuously with energy level equal
to a hamster in a wheel (about 3-watts). Allow the CritterZone to
remain plugged in 24-hours/day for optimal air quality.
To increase the effectiveness and clean the air up to 800 sq. ft,
CritterZones have a small, quiet fan. Very little bark, with a lot of
cleaning bite! But if the sound is still a concern, simply move the
unit to an outlet further away, to another room or to a hallway.
‘sniff sniff...’ CritterZone Air Naturalizers emit a light “metallic”
odor. This is a natural reaction from the air naturalization process.
The strength of the scent will vary based on the current level of
pollutants in the air and will lessen as the air is cleaned. The settings
on the CritterZone are adjustable as needed and are explained below.
LOCATION GUIDELINES
Use on a level surface at least 6” away from heat sources such as
ranges, fireplaces or heaters. Operate indoors only.
Do not block air vent openings so the air naturalization process has
optimal opportunity to fill the area and improve the air quality.
TIP: Air circulation helps! Use near an oscillating or ceiling fan to
increase the range of the CritterZone and assist with its effectiveness.
TIP: Moisture helps! CritterZone technology utilizes air moisture
during the Air Naturalization process. Humidifiers can help!
OPERATIONAL INFORMATION
Plug in your CritterZone. Use a grounded outlet. Wall units
should be plugged directly into a wall outlet. Corded units should be
placed on a dry and level surface. Leave a safe amount of slack in
the 10’ cord. Keep out of reach of curious, playful furry friends.
Choose a setting. [HIGH MED LOW] For larger areas, spot
treatments or areas with dense air pollution, set the unit to HIGH (far
left). For smaller areas or continual air cleaning, set the unit to MED
(middle). To maintain air quality, smaller areas, or if the natural
scent of the CritterZone is too strong, set the unit to LOW (far right).
The CritterZone Air Naturalizer is
designed to run continuously, so there is no
On/Off switch. Simply plug the unit into an
operational outlet, and let the CritterZone
improve your air quality 24/7.
www.CritterZoneUSA.com 612.235.4911
USER GUIDE
ELECTRICAL AND OPERATIONAL SAFETY WARNINGS
Do not use in or around water or water sources. Use dry paws and
hands when operating the unit. Always unplug the unit before
servicing, cleaning, or when using spray or steam floor cleaners.
CritterZone units are comprised of moving and electrical parts, much
of which are contained within the outer casing. The outer casing can
carefully be removed for detailed cleaning ONLY when unplugged.
Complete cleaning instructions can be found at our CritterZone
YouTube Channel: www.youtube.com/user/TheCritterZone
Should ANY part of the CritterZone unit or CritterZone accessory
become loose or look to be of concern, return the unit immediately
for replacement. NEVER attempt to retrieve a loose or broken
part from the unit when it is plugged in, or from the outlet itself.
(Corded Units) Ensure the power cord is securely plugged into the
unit. If cord or plug appears damaged, return the unit immediately
for exchange or repair. Do not pull, carry or lift unit by power cord.
Securely grasp the plug at the base when unplugging from outlet.
(Wall Units) Do not plug wall unit into a power strip or surge
protector. Wall units are designed to plug into wall outlets.
CritterZone units are designed to run continuously, therefore are
always powered ON when plugged in. Keep all tails, fingers, fur,
hair and clothing away from opening when unit is operational.
When “reactivating” a soiled area, spray the water directly on the
fabric before plugging in the CritterZone. Do not spray water on or
at the unit or the outlet. (see TIPS for more info on “reactivating”)
