CONGRATULATIONS on your choice of a CrimeStopper Universal Rear View Mirror. This booklet contains
all of the necessary information for connecting and using your mirror. If any questions should arise,
contact your installation facility or check out the Knowledge Base at www.crimestopper.com
MIR-045
MIR-45BT
Rear View Mirror
QUICK INSTALL
1230-62201-01-A
SCREEN SIZE 4.5”
DISPLAY RESOLUTION 480(H) X 272(V)
OPERATING VOLTAGE 9-16 Volts
CURRENT DRAW 0.04A (MIR-045)
0.06A (MIR-45BT)
VIDEO SIGNAL PAL/AUTO/NTSC
MIR-045/MIR-45BT
MIRROR OPERATION:
1. The LCD display will automatically turn ON when there is a video
signal on the CAMERA input
2. The AUX input will turn ON when there is a video signal
on the AUX input
3. A video signal on the CAMERA input will always
override an AUX input
MIR-45BT ONLY
BLUETOOTH OPERATION CONNECTING YOUR DEVICE:
1. Enable Bluetooth search on your device
2. Select the KV-4248 when it is found on your device
3. The mirror and device will pair
4. Once paired, the mirror will have a Bluetooth icon appear
DISCONNECTING YOUR DEVICE FROM THE MIRROR:
1. Turn the Bluetooth OFF on your device or remove/forget KV-4248
from your paired devices
2. If your device is 30ft (10 Meters) from the mirror, you will
automatically be disconnected
3. To reconnect, simply turn the vehicle OFF, then back ON. If you have
removed the mirror from your device, see Connecting your device
CALLER ID, ANSWERING AND ENDING CALLS:
1. Caller ID will automatically be displayed on the LCD display when
receiving a call
2. To answer a call, press the button
3. To End a call or reject a call, press the
button
AUDIO CONTROL:
1. Volume adjustment is controlled by your connected device
2. Pause
3. Track UP
4. Track DOWN
5. Play (Hold for 2 seconds)
M/OK
M/OK
