CrimeStopper EZ-31DP/33DP/34DP Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 29

background image

EZ-31DP/33DP/34DP 1-WAY SYSTEMS
EZ-64TW1/74TW2/84FM 2-WAY SYSTEMS
EZ-30DP Stand Alone unit
DP SERIES (Data port)

REMOTE ENGINE STARTING SYSTEM

INSTALLATION INSTRUCTIONS

INTRODUCTION

CONGRATULATIONS

on your choice of a “EZEE Start” System by Crimestopper Security Products Inc. This booklet

contains the information necessary for installing your remote starter system. If any questions arise, contact your
installation dealer or Crimestopper Security Products Inc. at the Tech Support number below.

DISCLAIMER:
This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation. To ease installation, we suggest that you
READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDELINE and the
information contained herein may differ from your vehicle. Crimestopper Security Products, Inc. and its’ vendors shall
not be liable for any accident resulting from the use of this product. This system is designed to be professionally
installed into a vehicle in which all systems and associated components are in perfect working condition.

TECHNICAL SUPPORT: (800) 998-6880

This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.

Such modification could void the user’s authority to use the

equipment.

Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
E-mail: [email protected]

CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063

REV A 07.2005

1
2
3
...
»

Содержание EZ-31DP/33DP/34DP






























Отзывы:

Нет отзывов

Похожие инструкции для EZ-31DP/33DP/34DP

Бренд: ABB Страницы: 200

Бренд: Radio Shack Страницы: 3

Бренд: Ultra Start Страницы: 8

Бренд: Panasonic Страницы: 16

Бренд: Lab-T Страницы: 17

SmartStuff Series

Бренд: TCP Страницы: 2

Бренд: Fronius Страницы: 8

Бренд: Subaru Страницы: 7

Бренд: Glacier Start Страницы: 8

CompuSTAR 2WFMR

Бренд: Firstech Страницы: 15

Бренд: Inel Страницы: 2

Бренд: Zenith Страницы: 16

Бренд: Radio Shack Страницы: 59

Бренд: iHome Страницы: 2

Бренд: GM-Fly Страницы: 9

Бренд: Advanced Keys Страницы: 11

Pronto SBCRU930

Бренд: Philips Страницы: 2

Prestigo SRT9320

Бренд: Philips Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды