Hardware Overview
LEDs
1. Power Indicator:
Steady green when power on, blinking green when a call is
ringing.
2. Line Keys
Steady green:
During a conversation, or after handset is picked up prior to
making a call.
Blinking red:
A call is ringing.
Off:
Line is Idle (not in use).
Place a call
Three ways to make a call:
1) Handset:
Pick up the handset; enter the number, and then press the
Send
softkey or press
.
2) Speaker
: Press
or the line keys; enter the number, and then press the
Send
softkey or press
.
3) Headset
: Press
; enter the number, and then press the
Send
softkey or
press
.
Note: You can also use Contacts or the Call log to dial the number you want.
Place the call using one of the three ways mentioned above.
End a call
To end a call in three different modes:
1) Handset:
hang up the handset or press the
Cancel
softkey.
2) Speaker:
press
, or press the
Cancel
softkey
3) Headset:
press the
Cancel
softkey.
Answer a call
1) Handset:
pick up the handset;
2) Speaker:
press
;
3) Headset:
press
.
Note: You can also reject the call by press the Reject soft key.
Redial
Press
to redial the last call that dialed.
Hold
Press
or press the
Hold
softkey during a call to place the caller on hold.
Press
or the
Resume
softkey to resume the call.
Call Transfer
Blind Transfer
a. Press
or the
Transfer
softkey during a call, the caller will be placed on
hold.
b. Enter the number that the call is to be transferred to.
c. Press
or the
Transfer
softkey to complete the transfer.
Attended Transfer
a. Press
or the
Transfer
softkey during a call, the caller will be placed on
hold.
b. Enter the number the call is to be transferred to, and press the Send softkey
or
.
c. When the person answers, make the introduction, then press
or
Transfer
softkey.
Transferring a call directly to another extensions voice mailbox
a. Press
or the
Transfer
softkey during a call, the caller will be placed on
hold.
b. Enter *10 plus the extension of the voice mailbox the call is to be transferred
to
c. Press
or the
Transfer
softkey to complete the transfer.
Call Conference
a. Dial the first party, when they answer, press the
Conf
softkey
b. Dial the second party, after they answer, press the
Conf
softkey again. All
parties will now be connected.
Call Mute
Press
to mute the microphone during the call
Press
again to un-mute the conversation.
