Crestron UC-PHONE-T Скачать руководство пользователя страница 28

Страница: 28 / 62

•

UC-PHONE-T & UC-PHONE-T-PLUS

Supplemental Guide – DOC. 8413A

Upload a CA certificate. To upload a CA certificate, click inside the CA

Certificates field, select a certificate file, and click Upload.

•

EAP-PEAP/GTC: When selected, PEAP/GTC authentication is used.

Enter the identity and password in the Identity and MD5 Password fields.

Upload a CA certificate. To upload a CA certificate, click inside the CA

Certificates field, select a certificate file, and click Upload.

•

EAP-TTLS/EAP-GTC: When selected, TTLS/GTC authentication is used.

Enter the identity and password in the Identity and MD5 Password fields.

Upload a CA certificate. To upload a CA certificate, click inside the CA

Certificates field, select a certificate file, and click Upload.

•

EAP-FAST: When selected, FAST authentication is used. Enter the identity and

password in the Identity and MD5 Password fields.

Span to PC

The Span to PC sets the phone to span data packets received from the Internet port to

the PC port.

To span data packets from the Internet port to the PC port, set Span to PC Port to ON.

To turn off spanning, set Span to PC Port to OFF.

ICMPv6 Status

The phone can obtain IPv6 network settings using the Stateless Address

Autoconfiguration (SLAAC) method.

To use SLAAC to obtain network settings, set Active to ON. Otherwise, set Active to

OFF.

Features

The Features menu contains sections for configuring the lock, Bluetooth, and LED

operation. Click a section name to configure parameters.

Phone Lock

The phone lock function locks the phone to prevent it from unauthorized use. When the

phone is locked, a user must enter the password to unlock it. The Phone Lock section

enables the lock, sets the unlock code, and sets the amount of idle time before locking

the phone. Click Phone Lock to configure these parameters. The Phone Lock section is

displayed.

Содержание UC-PHONE-T































































Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды

Crestron UC-PHONE-T, Дополнительное руководство

Результаты поиска

Содержание UC-PHONE-T

Отзывы:

Похожие инструкции для UC-PHONE-T

Бренды по названию

Популярные бренды