Supplemental Guide – DOC. 8412A
UC-P100-S/UC-P110-S Phones for Skype for Business
•
241
Enter the address in the Address field.
Enter the building name in the Building field.
Enter the city in the City field.
Enter the state in the State field.
Enter the post code in the Post Code field.
Select the country from the Country drop-down list.
Click Confirm to accept the changes.
Add Location Information Manually via the Phone User Interface
Tap Setting > Basic > Location.
Enter the location name in the Set Location field.
Enter the address in the Set Address field.
Enter the building name in the Set Building field.
Enter the city in the Set City field.
Enter the state in the Set State field.
Enter the post code in the Set Postcode field.
Select a country from the Set Country drop-down list.
Tap Save.
Multicast Paging
Multicast paging allows the phone to send/receive Real-time Transport Protocol (RTP)
streams to/from the pre-configured multicast address(es) without involving SIP
signaling. Up to 10 listening multicast addresses can be specified on the phone.
Send an RTP Stream
Send an RTP stream without involving SIP signaling by pressing a Paging soft key. A
multicast address (IP: Port) should be assigned to the multicast paging key, which is
configured to transmit an RTP stream to a group of designated phones. When the phone
sends the RTP stream to a pre-configured multicast address, each phone preconfigured
to listen to the multicast address can receive the RTP stream. When the originator stops
sending the RTP stream, the subscribers stop receiving it.
