Video Card for TPS/Lectern Panel
Crestron
TPS-VIDL-1/TPS-VIDL-2
4. Select the preferences for the video signals appearance. Refer to
the following table for further information.
Video Setup Details
VIDEO
SCREEN
BUTTONS
DESCRIPTION
Brightness
Use to increase or decrease image brightness.
Contrast
Use to increase or decrease image contrast.
Saturation
Use to increase or decrease image saturation.
Hue
Use to shift the color balance.
Fast Motion /
Still Video
(toggle)
The
Fast Motion
setting eliminates motion
artifacts caused by the difference between the
first and second halves of a video field and
softens the image. The
Still Video
setting yields
a much sharper image, however, motion
artifacts may occur if fast moving objects are
displayed.
Soft / Sharp
(toggle)
Used to soften images that are too sharp or
sharpen video images that are too soft.
Default
Returns you to the default settings
*
.
Return
Saves the settings and returns to the SETUP
MENU
* Video default is 50% for each of the video parameters (brightness, contrast,
saturation, and hue) fast motion, sharp picture, and Composite Video on
BNC connector
5. Select
the
Return
button to save settings and return to the
SETUP MENU.
VT Pro-e Setup
A video window object must reside on a page within the uploaded
VT Pro-e touchpanel project and the TPS-VIDL-1 or TPS-VIDL-2 must
be properly installed into the touchpanel in order for video signals to be
displayed.
When using the TPS-VIDL-2, the video window object properties must
have the video source specified in the
Input number
field (“Composite 1”
14
•
Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2
Operations & Installation Guide - DOC. 6070
