Crestron TPMC-8L Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 68

Crestron TPMC-8L Скачать руководство пользователя страница 43

Crestron

TPMC-8L

Isys i/O™ 8.4” Touchpanel Media Center

from standby mode. When the touchpanel is reactivated, the last screen to be
displayed reappears.

NOTE:

The pushbuttons will still function when the touchpanel is in standby mode

but will not cause it to awaken from standby. You must touch the screen to reactivate
the touchpanel.

Ethernet Status Details

The

Ethernet Status

section of the setup menu has an indicator to show when the

TPMC-8L is connected via its

LAN

port. IP and Mac addresses are also shown.

Save & Reboot Details

To save any changes and reboot the touchpanel, touch

Save & Reboot

, located in the

lower right section of the setup menu.

Exit Details

Touch

Exit

to leave the setup menu and return to the project. If no project has been

loaded, the touchpanel will display an error message and return to the setup menu.

Mounting Options

The TPMC-8L touchpanel installs simply and cleanly into existing or newly
constructed walls with an assortment of pre- and post-construction mounting options.
All mounting options are provided separately from the actual touchpanel. Refer to
the following table for a complete list of mounting options and respective Installation
Guides for this touchpanel.

Mounting Options for the TPMC-8L

PRE-CONSTRUCTION*

OPTION

POST-CONSTRUCTION**

OPTION

MODEL NUMBER

DOCUMENT

NUMBER

Back Box Kit

-

BB-8L

6589

Pre-Construction Mount

Kit

-

PMK-8L

6590

Mud Mount Kit

(accessory)

- MMK-8L

6591

Trim Mount Kit

(accessory)

-

TMK-8L

6592

-

Wall Mount Kit – Mud

WMKM-8L

6591

-

Wall Mount Kit – Trim

WMKT-8L

6592

* Pre-construction refers to framed walls prior to hanging drywall.

** Post-construction refers to framed walls with drywall hung.

NOTE:

There is also a rack mount kit (RMK-8L) available for the TPMC-8L. Refer

to the latest version of the RMK-8L Installation Guide (Doc. 6596).

If the BB-8L or PMK-8L are to be used and a touchpanel is not available, the
installer can either leave the hole in the mounting surface open (if permitted by local
building codes) or attach the cover plate supplied with the mounting kit.

Operations & Installation Guide – DOC. 6594B

Isys i/O™ 8.4” Touchpanel Media Center: TPMC-8L

•

39

«
...
41
42
43
44
45
...
»

Содержание TPMC-8L





































































Отзывы:

Нет отзывов