SmarTouch™ Control Processor
Crestron
ST-CP
Typical Connection Diagram when Programming
15717 (PART OF ST-PK)
15710 (PART OF ST-PK)
PC
CONTROL
SYSTEM
SERIAL
PORT
USE ADAPTER
(PART OF ST-PK)
NOTE:
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
TOUCHPANEL
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
1. Attach the RJ11 to DB9F adapter (15556, supplied with ST-PK) to one
end of the PC to control processor cable (15717, supplied with ST-PK).
2. Attach the DB9 connector (of the adapter and cable combination) to the
RS-232 port on the PC.
3. Attach the RJ11 connector (of the adapter and cable combination) to
the ST-CP port, labeled PC.
4. Attach the 3.5 mm stereo connector of the touchpanel to control
processor cable (15710, supplied with ST-PK) to the touchpanel.
5. Attach the RJ11 connector of the touchpanel to control processor cable
to the ST-CP port, labeled NET.
6. Attach the 500 mA power pack to ST-CP (1000 mA power pack for
ST-CP/UK) and insert plug into outlet.
7. The touchpanel should either receive power from the supplied power
pack or an internal battery.
In the event that the two cables and adapter required to download a program from the
control processor to the touchpanel are lost or not acquired via the purchase of the
ST-PK, the following two diagrams are provided so that the cables can be made on
site.
PC to Control Processor Cable
6
•
SmarTouch™ Control Processor: ST-CP
Operations Guide - DOC. 5820
