Programming Kit Crestron
ST-PK
4
••
STS Programming Kit: ST-PK
Operations Guide - DOC. 5662C
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE:
Equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
The equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
n
Reorient or relocate the receiving antenna.
n
Increase the separation between the equipment and receiver.
n
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
n
Consult the dealer or an experienced radio/TV technician for help.
Setup
STS Equipment
The items required to program STS equipment, listed below, are provided as part of
the programming kit (ST-PK). These kit items can be used time and time again to
program or reprogram each system.
STS Kit Equipment
EQUIPMENT
PART
NUMBER
DESCRIPTION
Software
SAXD2535-1AY1 Software package for creating touch screen
programs.
Programming
Cable Assembly
15710
Provides connection between touchpanel and
control processor. Used during programming
only.
RJ11 Cable
Assembly
15717
Provides connection between control processor
and RJ11/DB9F adapter. Used during
programming only.
RJ11 to DB9F
Adapter
15556-1B
Provides connection between RJ11 cable
assembly and a PC. Used during programming
only.
