background image

2-Series Card Cage System  

   

 

 

 

    Crestron 

RACK2

 

Further Inquiries 

If after reviewing this Operations Guide, you cannot locate specific information or 
have questions, please take advantage of Crestron's award winning customer service 
team by calling:  

• 

In the US and Canada, call Crestron’s corporate headquarters at  
1-888-CRESTRON [1-888-273-7876].  

• 

In Europe, call Crestron International at +32-15-50-99-50. 

• 

In Asia, call Crestron Asia at +852-2341-2016. 

• 

In Latin America, call Crestron Latin America at +5255-5093-2160.  

• 

In Australia and New Zealand, call Crestron Pacific at  
+613-9480-2999. 

Firmware Upgrades 

To take advantage of all the RACK2 features, it is important that the unit contains 
the latest firmware available. Therefore, please check our website 
(

http://www.crestron.com/downloads/software_updates.asp

) for the latest version of 

firmware. Not every product has a firmware upgrade, but as Crestron improves 
functions, adds new features, and extends the capabilities of our products, firmware 
upgrades are posted. For questions regarding upgrade procedures, contact Crestron 
customer service.  

Future Updates 

As Crestron improves functions, adds new features, and extends the capabilities of 
the RACK2, additional information may be made available as manual updates. These 
updates are solely electronic and serve as intermediary supplements prior to the 
release of a complete technical documentation revision.  

Check the Crestron website (

www.crestron.com

) periodically for manual update 

availability and its subjective value. Updates are available from the Downloads | 
Product Manuals section and are identified as an “Addendum” in the Download 
column. 

44  

  2-Series Card Cage System: RACK2 

Operations Guide – DOC. 5958 

Содержание RACK2





















































Отзывы: