background image

Crestron 

QM-RMCRX-BA 

  

         QuickMedia™ Receiver/Processor

 

 Software License Agreement 

This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business 

entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, 
as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”). 

BY INSTALLING, COPYING, OR OTHERWISE USING THE SOFTWARE, YOU REPRESENT THAT YOU 

ARE AN AUTHORIZED DEALER OF CRESTRON PRODUCTS OR A CRESTRON AUTHORIZED INDEPENDENT 
PROGRAMMER AND YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT 
AGREE TO THE TERMS OF THIS AGREEMENT, DO NOT INSTALL OR USE THE SOFTWARE. 

IF YOU HAVE PAID A FEE FOR THIS LICENSE AND DO NOT ACCEPT THE TERMS OF THIS 

AGREEMENT, CRESTRON WILL REFUND THE FEE TO YOU PROVIDED YOU (1) CLICK THE DO NOT ACCEPT 
BUTTON, (2) DO NOT INSTALL THE SOFTWARE AND (3) RETURN ALL SOFTWARE, MEDIA AND OTHER 
DOCUMENTATION AND MATERIALS PROVIDED WITH THE SOFTWARE TO CRESTRON AT:  CRESTRON 
ELECTRONICS, INC., 15 VOLVO DRIVE, ROCKLEIGH, NEW JERSEY  07647, WITHIN 30 DAYS OF PAYMENT. 

LICENSE TERMS 

Crestron hereby grants You and You accept a nonexclusive, nontransferable license to use the Software (a) in machine 

readable object code together with the related explanatory written materials provided by Creston (b) on a central processing unit 
(“CPU”) owned or leased or otherwise controlled exclusively by You, and (c) only as authorized in this Agreement and the 
related explanatory files and written materials provided by Crestron.  

If this software requires payment for a license, you may make one backup copy of the Software, provided Your 

backup copy is not installed or used on any CPU. You may not transfer the rights of this Agreement to a backup copy unless the 
installed copy of the Software is destroyed or otherwise inoperable and You transfer all rights in the Software.  

You may not transfer the license granted pursuant to this Agreement or assign this Agreement without the express 

written consent of Crestron. 

If this software requires payment for a license, the total number of CPU’s on which all versions of the Software are 

installed may not exceed one per license fee (1) and no concurrent, server or network use of the Software (including any 
permitted back-up copies) is permitted, including but not limited to using the Software (a) either directly or through commands, 
data or instructions from or to another computer (b) for local, campus or wide area network, internet or web hosting services; or 
(c) pursuant to any rental, sharing or “service bureau” arrangement. 

The Software is designed as a software development and customization tool. As such Crestron cannot and does not 

guarantee any results of use of the Software or that the Software will operate error free and You acknowledge that any 
development that You perform using the Software or Host Application is done entirely at Your own risk. 

The Software is licensed and not sold. Crestron retains ownership of the Software and all copies of the Software and 

reserves all rights not expressly granted in writing.  

OTHER LIMITATIONS 

You must be an Authorized Dealer of Crestron products or a Crestron Authorized Independent Programmer to install 

or use the Software. If Your status as a Crestron Authorized Dealer or Crestron Authorized Independent Programmer is 
terminated, Your license is also terminated. 

You may not rent, lease, lend, sublicense, distribute or otherwise transfer or assign any interest in or to the Software. 
You may not reverse engineer, decompile, or disassemble the Software. 
You agree that the Software will not be shipped, transferred or exported into any country or used in any manner 

prohibited by the United States Export Administration Act or any other export laws, restrictions or regulations (“Export Laws”). 
By downloading or installing the Software You (a) are certifying that You are not a national of Cuba, Iran, Iraq, Libya, North 
Korea, Sudan, or Syria or any country to which the United States embargoes goods (b) are certifying that You are not otherwise 
prohibited from receiving the Software and (c) You agree to comply with the Export Laws.  

If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of the 

Agreement, which shall remain valid and enforceable according to its terms. This Agreement may only be modified by a writing 
signed by an authorized officer of Crestron. Updates may be licensed to You by Crestron with additional or different terms. This 
is the entire agreement between Crestron and You relating to the Software and it supersedes any prior representations, 
discussions, undertakings, communications or advertising relating to the Software. The failure of either party to enforce any 
right or take any action in the event of a breach hereunder shall constitute a waiver unless expressly acknowledged and set forth 
in writing by the party alleged to have provided such waiver.   

Operations Guide – DOC. 6332 

  QuickMedia™ Receiver/Processor: QM-RMCRX-BA 

 69

 

Содержание QM-RMCRX-BA













































































Отзывы: