Crestron QM-FTCC-TPS4, Руководство по эксплуатации и установке

Страница: 24 / 52

FlipTop Touchpanel Computer Center Crestron QM-FTCC-TPS4
Mounting Bracket Installation
NOTE:
Be careful not to press any screen pushbuttons or hard keys while closing
the FlipTop, even though the screen is disabled when the FlipTop begins to close and
all pressed buttons are released.
Hardware Hookup
Refer to the following hookup diagram and, aside from attaching power last,
complete the connections in any order.
NOTE:
To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the specifications table. Consideration
must be given if installed in a closed or multi-unit rack assembly, inside a closed
desk, or in a closed podium since the operating ambient temperature of these
environments may be greater than the room ambient. Contact with thermal insulating
materials should be avoided on all sides of the unit.
NOTE:
The maximum continuous current from equipment under any external load
conditions shall not exceed a current limit that is suitable for the minimum wire
gauge used in interconnecting cables. The ratings on the connecting unit's supply
input should be considered to prevent overloading the wiring.
20
•
FlipTop Touchpanel Computer Center: QM-FTCC-TPS4 Operations & Installation Guide - DOC. 6393