Crestron Prodigy System Скачать руководство пользователя страница 98

Страница: 98 / 144

Prodigy

System

Crestron

XPanel

Crestron XPanel

The Crestron XPanel allows remote control of the Prodigy System from a
remote PC over the internet or local area nework. The Prodigy system allows
one remote PC to be connected.

General Controls

The Home Page

The Home page is where you can access controls for media, lighting (if
equipped) and climate (if equipped).

Click

to display the Home page.

Power Control

The last selected device can be turned on or off with the power control.

NOTE:

If a device is active in another room (i.e. the iPod source is on in the

theater and the second audio room), using the power control will only affect
the audio output in the controlled room.

To turn the last selected device on or off, click

•

Prodigy System: PMC2

System User Guide – DOC. 7007B

Содержание Prodigy System

















































































































































Результаты поиска

Содержание Prodigy System

Отзывы:

Crestron Prodigy System, Руководство пользователя, Страница: 98 / 144

Результаты поиска

Содержание Prodigy System

Отзывы: