manualshive.com logo in svg

Crestron Prodigy System, Руководство пользователя

Поделиться
Скачать
Crestron Prodigy System Скачать руководство пользователя страница 140

Prodigy

®

 System 

 

Crestron 

P-TSTATRF

 

P-TSTATRF Prodigy Wireless Thermostat 

The Prodigy Wireless Thermostat (P-TSTATRF) is used to control HVAC 
functions in a Prodigy system. It functions the same as a traditional 
thermostat while allowing for control by a Prodigy system. Up to three  
P-TSTATRF thermostats can be used in a Prodigy system. 

 

Temperature Control 

A controlled climate zone uses setpoints to determine when the zone will be 
heated or cooled. A zone may be configured to use only heating, cooling, or 
a combination of both to maintain a temperature. Depending on the system 
mode, a zone may use either one (single) or two (dual) setpoints to regulate 
temperature. 

•

 

Single Setpoint

 (available for 

Heat

, 

Cool

 or 

Auto

 modes): When 

using a single setpoint to regulate temperature, a single setpoint is 
used for regulation at all times, regardless of whether the system is 
heating or cooling.  

NOTE:

  When using a single setpoint, the controlled zone has a  

20-minute change limiter to prevent system toggling. 

•

 

Dual Setpoints

 (for use in 

Auto

 mode only): When using dual 

setpoints, separate heat and cool setpoints are used. When the 
ambient temperature drops below the heat setpoint, the controlled 
zone will call for heat to maintain the heat setpoint. When the 
ambient temperature rises above the heat setpoint, the controlled 
zone will not call for cooling until the temperature exceeds the cool 
setpoint. When the ambient temperature drops below the cool 
setpoint, the controlled zone will not call for heating until the 
temperature is below the heat setpoint. 

NOTE:

  When dual setpoints are used, the P-TSTATRF in the 

controlled zone will display the setpoint closest to the ambient 
temperature.  

For instructions on setting the system mode, refer to “Set the System Mode” 
on page 135. 

134  

•

  Prodigy System: PMC2 

System User Guide – DOC. 7007B 

Содержание Prodigy System

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды