Crestron
PMC2
Prodigy™
Media
System
2. Store the scene:
•
PLX2:
Press and hold (for three seconds) the soft button next to
the scene name to be saved.
•
PTL4 & Crestron Control App:
Touch and hold (for three
seconds) the scene name to be saved.
•
XPanel:
Click and hold (for three seconds) the scene name to be
saved.
Controlling a Switch or Dimmer
Individual switches and dimmers in a room can be controlled from a
P-DIMRF, a P-SWRF, a P-CBD (if installed), a PLX2, a PTL4 (if installed),
the
Crestron Control App (if using an iPhone for control), or a Crestron
XPanel project (if using a PC for control).
P-DIMRF Wall Dimmer
The P-DIMRF has a mode selection switch labeled
RUN SET OFF
.
Depending on the setting, the P-DIMRF will perform different functions.
P-DIMRF
•
The
RUN
position is used to turn the light on or off, raise or lower the
lighting level, and recall a preset lighting level. When the mode
selection switch is in the
RUN
position, the dimmer operates as
follows:
To raise the light level to its preset value, tap the upper part
of the large button. To raise the light level to 100%
brightness, tap the upper part of the button again.
⇒
⇒
⇒
⇒
To manually raise the light level, press and hold the upper
part of the large button. Release when the desired lighting
level is reached.
To lower the light level to its preset value, tap the lower part
of the large button. To turn off the light, tap the lower part of
the large button again.
To manually lower the light level, press and hold the lower
part of the large button. Release when the desired lighting
level is reached.
•
When the switch is in the
SET
position, the dimmer can store a
preset lighting level. This level is independent of preset lighting
scenes. To store a preset level:
System User Guide – DOC. 6840A
Prodigy Media System: PMC2
•
41
Содержание Prodigy PMC2
Страница 1: ...Prodigy System User Guide Prodigy System User Guide ...
Страница 4: ......
