DO
GUIDE
4. Attach cables to the rear of the MPC-M5. Make the connections as called out in the following illustration.
Apply power after all connections have been made. When making connections to the MPC-M5, use Creston
®
power supplies for Crestron
equipment.
5. Use the two included 4-40 x 1/4˝ screws to attach the MPC-M5 to the mounting plate.
CAUTION:
Excess wire that is pinched between the MPC-M5 and the electrical box could short out. Make sure that all wires are completely inside
the electrical box and not between the box and the MPC-M5.
a. Attach the label holder by placing it over its slots and sliding it downward into position.
b. Attach the included labels in the appropriate positions on the MPC-M5.
MPC-M5
Media Presentation Controller
DO
Install the MPC-M5 Wiring
Install a standard 2-gang electrical box (not supplied) in a wall or podium.
1. Route all required
COMPUTER
,
LAN
,
COM
,
IR
,
I/O
and/or
RELAY
wiring to the electrical box.
CAUTION:
Incorrect wiring may damage the MPC-M5.
2. Depending on the application, the MPC-M5 inputs can be wired three ways.
* Detection of an occupancy sensor will also invert the SIMPL program logic: when the circuit is open (motion detected), the digital signal will be high; when the circuit is closed (no
motion detected), the digital signal will be low.
NOTE
: The settings for the pull-down resistor are specified in the SIMPL Windows program. For more information, refer to the SIMPL Windows
help file.
DO
Connect the MPC-M5
After the wiring has been installed and verified, attach the mounting plate to the electrical box.
1. Turn system power OFF.
2. Refer to the following illustration, and use the four included 6-32 x 3/4˝ screws to attach the mounting plate to the electrical box.
3. Connect the grounding wire from the mounting plate to an earth ground (building steel).
DO
Check the Box
QUANTITY
PRODUCT
COLOR
PART NUMBER
1
Plate, Metal, Mounting, with Ground Wire
4510704
2
Screw, 4-40 x 1/4", Pan Head, Phillips
2007156
4
Screw, 6-32 x 3/4", Truss Head, Combo
2009211
1
Tool, 1/16" Allen Wrench, L-shape, 3" Blade
2022867
Items for MPC-M5-W Only
1
Labels, Actions, 100 Piece Set
White
4509402
1
Labels, Sources, 100 Piece Set
White
4509400
1
Plate, Front Panel
White
4509213
4
Screw, 4-40 x 1/2", Button Head, Hex
2021396
Items for MPC-M5-B-T Only
1
Labels, Actions, 100 Piece Set
Black
4509403
1
Labels, Sources, 100 Piece Set
Black
4509401
1
Plate, Front Panel
Black
4509214
4
Screw, 4-40 x 1/2", Button Head, Hex
Black
2021395
Screws (4) 6-32 x 3/4"
Mounting plate
Ground wire
COM:
To any
3-wire RS-232
device
RELAYS:
To controllable
devices
IR:
To IRP2 or
serial devices
I/O:
Inputs from
digital
devices
(and 24 volt
output power
for sensors)
LAN PoE:
10/100BASE-T Ethernet
to LAN or web
Button labels
Screws (2)
4-40 x 1/4"
Label holder
24 G 1 2
Detecting a floating contact
voltage (e.g., from a
Crestron
®
occupancy sensor)
Detecting a contact
voltage from a
switch or relay
Detecting a contact
closure from a
switch or relay
Pull-down
resistor:
enabled*
24 G 1 2
+
-
24 Vdc
Max
24 G 1 2
Crestron
occupancy
sensor