Crestron ML-500 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 30

Crestron ML-500 Скачать руководство пользователя страница 5

Crestron

ML-500

Mini LCD RF Wireless Handheld Remote

Mini LCD RF Wireless Handheld
Remote: ML-500

Introduction

The Crestron

®

Mini LCD RF Wireless Handheld Remote (ML-500) is a universal

remote control that is used to control a Crestron system. Prior to customer delivery,
the ML-500 must be configured and programmed into the control system program
with SIMPL Windows. Additionally, labels for functions, pages, and favorites must
be programmed using Crestron VisionTools

®

Pro-e (VT Pro-e) software.

The ML-500 is packaged with an interface cable for uploading a VT Pro-e project
from a PC directly to the ML-500. The included AAA batteries must be installed into
the remote prior to uploading any VT Pro-e projects. For instructions on installing
the batteries, refer to the latest revision of the ML-500 Operations Guide (Doc. 6246)
which is included with the ML-500 or can be downloaded from the Crestron website
(

www.crestron.com

Physical Description

The ML-500 (refer to the following illustration) has a 2.10” x 1.40” (5.33 cm x 3.56
cm) backlit Liquid Crystal Display (LCD). The LCD lists the options associated with
the 10 programmable soft keys that flank the LCD. Three navigation keys located
below the LCD are used to navigate between the various control screens on the
remote control. Below the navigation keys are 34 programmable hard keys
(including a thumbpad) that can be programmed to perform device-specific
functions. A button on the right side of the remote switches the display/keypad
backlighting on and off. For information on the operation of the ML-500, refer to the
latest revision of the ML-500 Operations Guide (Doc. 6246) which is included with
the ML-500 or can be downloaded from the Crestron website (

www.crestron.com

The ML-500 can directly communicate with the Crestron MC2W control system.
The ML-500 can communicate with other Crestron control systems via the Crestron
CNRFGWA-418 1-Way RF Receiver, which operates at 418 MHz. The ML-500
cannot directly communicate with any devices controlled by a control system.

Programming Guide – DOC. 6263

Mini LCD RF Wireless Handheld Remote: ML-500

•

1

«
...
3
4
5
6
7
...
»

Содержание ML-500































Отзывы:

Нет отзывов