Crestron MiniTouch MT-1000C, Руководство по программированию

Страница: 7 / 36

Crestron MT-1000C 3.8 Inch RF Remote
The following are the earliest useable software version requirements for the PC:
•
SIMPL Windows version 2.05.22 or later, Library 321 and SIMPL+
Cross Compiler version 1.1.
•
Crestron VisionTools
®
Pro-e (VT Pro-e) version 3.3.3.5 or later. Use
version 3.3.3.6 or later to program hard keys 14, 15 and 16.
•
Crestron Database version 17.1.0 or later. Required by SIMPL
Windows and VisionTools Pro-e.
•
Crestron Toolbox 1.0.7 or later.
•
Control system upgrade file (CUZ) version 3.008 or later.
•
Microsoft
®
ActiveSync
®
version 3.8 or later (On the CD included with
the MT-1000C).
NOTE: To upgrade the MT-1000C firmware version 2.22.1.50520 in order to
use hard keys 14, 15 and 16, use Crestron Toolbox version 1.0.7 or later.
NOTE: If you are using a CNRFGWA-418 or an MC2W that was shipped prior
to February 15, 2005 you must upgrade the unit at the factory.
Microsoft
®
ActiveSync
®
and the MT-1000C Driver
The MT-1000C requires Microsoft ActiveSync and the MT-1000C driver for
communication with Crestron Toolbox. The MT-1000C driver is included in VT
Pro-e version 3.3.3.5 or later and with Crestron Toolbox.
NOTE: Begin the installation process with the equipment disconnected.
When you install VT Pro-e, the software searches for ActiveSync on your
computer. If it is not found, you will be prompted to install ActiveSync. Restart
the computer after installing the VT Pro-e and MT-1000C components or
Crestron Toolbox.
Please use the following steps to install ActiveSync.
1. Your MT-1000C comes with a CD that contains Microsoft ActiveSync.
Find and run “ActiveSync.exe” from the included CD.
2. When a new setup window opens for ActiveSync, click NEXT .
“Microsoft ActiveSync” Setup Window
Programming Guide – DOC. 6330A 3.8 Inch RF Remote: MT-1000C
•
3