Product Manual — Doc. 9324C
IV-SAM-VXN-1B, IV-SAM-VXP-1B, and IV-SAM-VXS-1B • 80
Advanced Settings
Select the Advanced tab to view the available advanced settings.
Advanced Tab
The following advanced settings can be configured.
Room Configurations
The Room Configurations setting allows for different microphones and room furniture
arrangements to be used. This is especially helpful within divisible and multipurpose rooms.
Each room configuration saves a separate copy of all the settings in the Automate VX system.
Room Configuration Settings
Each layout is given an ID number and corresponds to the associated configuration name.
l
To add additional configurations, select Add Config. A new configuration will be added
with the next available numbered ID.
l
To remove configurations, select Remove Config. The last available configuration is
removed (for example, if configurations 1-4 are created, configuration 4 will be removed).
To change the name of a configuration, it must be done within Room Designer. For more
information, refer to
NOTE: Removing a configuration will always remove the most recently created
configuration. It will also remove the configuration in Room Designer. Ensure that projects
are saved within Room Designer and exported to a local drive before removing
configurations.
