Isys™ 5.7” Tilt Touchpanel
Crestron
TPS-6
ETHERNET
From the SETUP MODE menu, touch
CRESNET ETHERNET
to enter the
CRESNET SETUP menu. Touch
ETHERNET
to enter the ETHERNET SETUP
menu.
ETHERNET SETUP Menu
The ETHERNET SETUP menu offers a series of buttons which open additional
menus and displays that are detailed in subsequent paragraphs. After Ethernet
parameters have been selected, touch
RETURN
to go to the previous menu. When
all parameters have been selected, touch
RETURN
repeatedly to go back to the
SETUP MODE menu or the MAIN MENU.
The ETHERNET SETUP menu also provides information on Ethernet link status,
MAC and IP addresses,
-
and
+
controls to set the
CTP Port
, a
Set Default Port
button to return the CTP Port setting to its factory default and buttons to
Enable
or
Disable
Ethernet
,
CIP
and
Autodiscovery
.
By default, DHCP is enabled. To use a static IP address, touch the
Disable
button
under
DHCP
. The
DHCP Functions
section of the menu, with the
Renew IP
and
Release IP
buttons, will change to a
Static IP Settings
section, with
IP Address
and
DNS Servers
buttons. A new
Reboot required for settings to take effect. Reboot
Now
button will appear, as shown in the following illustration.
ETHERNET SETUP Menu (DHCP Disable)
18
•
Isys™ 5.7” Tilt Touchpanel: TPS-6
Operations Guide – DOC. 6945A
Содержание Isys TPS-6
Страница 1: ...Crestron TPS 6 Isys 5 7 TiltTouchpanel Operations Guide...
Страница 4: ......