Crestron
TPS-4500V & TPS-4500LV
12 Inch Tilt/Lectern Touchpanels
RS-232 Menu
RS-232 MENU
The touchpanel allows for five RS-232 communication methods:
•
Console (i.e. loading programs)
•
Control (i.e. non-Crestron device): For communicating to third-party
devices not controlled by a Crestron control system.
•
Touch output (communication of touch coordinates to an external device)
•
Mouse input (allows a mouse to control an external device as a “touch the
PC” device)
•
External touch screen input.
Touch the communication option to select communication parameters and then select
Save and Return
to save the RS-232 settings and return to the SETUP MENU. For
instructions on selecting the communication method, refer to “Appendix C:
Configuring the RS-232 Port for Use” on page 45.
Video Menu
The TPS-4500V/LV can display a single video source connected to either the 6-pin
connector or the BNC connectors of the TPS-4500LV or the TPS-4500IMPC.
Video Setup (Horizontal Lines Portray Video Sample)
Use this screen to select one of the video inputs and adjust the brightness, contrast,
saturation, and hue, if necessary. The user has the option to force the video image to
a certain mode (i.e., composite video or S-video) or switch modes automatically after
checking the image for colors. Use either the
TP Composite
/
BNC
Composite
or
TP S-Video
/
BNC
S-Video
buttons to manually control the mode.
TP
or
BNC
on
the selected button specifies the video input connector.
TP
corresponds to the twisted
pair connector (balanced video from a PVID, Room Box, etc.) and
BNC
corresponds
to the BNC connectors (unbalanced video from a VCR, DVD, etc.). Use the
appropriate
Auto Detect
button for automatic control. The text color of the selected
button is red rather than black.
NOTE:
The video signal type can be automatically detected as long as one signal is
sent to the touchpanel.
Operations Guide - DOC. 6160
12 Inch Tilt/Lectern Touchpanels with Video: TPS-4500V & TPS-4500LV
•
13
Содержание Isys TPS-4500LV
Страница 4: ......