Crestron Isys TPS-4000L, Руководство по эксплуатации, Страница: 14 / 52

10.4” Lectern/Wall Mount Touchpanel Crestron Isys
®
TPS-4000L
Interface Menu
INTERFACE MENU
The touchpanel communicates with a control system to activate commands or to
display feedback from components within the system. The communication interface
must be correctly specified or communication will not occur. To set communication
parameters select the
Interface button located on the SETUP MENU and display the
INTERFACE MENU, shown to the left.
The Cresnet network identity number (CRESNET ID) is displayed on the
INTERFACE MENU. CRESNET ID is a two-digit hexadecimal number. The
hexadecimal number can range from 03 to FE and must correspond to the Net ID set
in the SIMPL Windows program of the Cresnet system. Matching IDs between the
touchpanel and SIMPL Windows program is required if data is to be successfully
transferred. The Net ID for the TPS-4000L is factory set to 03. No two devices in the
same system can have the same Net ID.
Two buttons adjacent to the hexadecimal display, UP and DOWN , increase and
decrease the CRESNET ID by one, respectively.
Select the Return button located on the INTERFACE MENU to accept the changes
and return to the SETUP MENU.
Audio Menu
AUDIO MENU
Audio is a useful feedback tool and it can be used to enhance a custom interface. To
access the AUDIO MENU, shown to the left, press the
Audio button from the
SETUP MENU. The AUDIO MENU offers a series of buttons, which opens
additional screens and is detailed in a table after this paragraph. Two of the buttons
on the AUDIO MENU perform a function directly. The
Restore Default Settings
button returns all audio parameters to their default settings when the button is
selected. After audio parameters have been set, select the
Return button to return to
the SETUP MENU.
Audio Setup Details
AUDIO
MENU
BUTTON
1
AUDIO
SETUP
SCREEN
DESCRIPTION
2
Master 88% Master
Volume
The volume of all audio types (WAV, line, and key
click) is affected by the Master Volume control. If
the Master Volume control is set to 100%, the
volume for any type of audio is at maximum. If the
Master Volume is set to 0%, the value of all audio
types is overridden and the touchpanel is silent. If
Master Volume is a percentage (say 50%), then all
audio types can only achieve half of their
maximum value.
WAV 88%
(On)
WAV Enable WAV files with the WAV On button. WAV
Off disables this feature. Adjust the volume with
the UP and DOWN buttons. Select the Play WAV
File to sample and adjust the volume as a pre-
loaded WAV file plays.
(continued on following page)
10
•
10.4 Inch Lectern/Wall Mount Touchpanel: Crestron Isys® TPS-4000L Operations Guide – DOC. 6301