Crestron Isys TPS-1700, Руководство по эксплуатации

Страница: 13 / 36

Crestron TPS-1700 Isys
®
Wired 5.7 Inch Tabletop Touchpanel
Operations Guide - DOC. 6223A Isys
®
Wired 5.7 Inch Tabletop Touchpanel: TPS-1700
•
9
Hardware Hookup
CAUTION: Do not apply excessive pressure to the touchscreen display during
handling. Doing so can crack the screen and damage the touchpanel.
The TPS-1700 touchpanel has rubber pads on the underside of its base so that it can
rest on a horizontal surface. The only connection necessary is made to the 6-pin
RJ-11 connector mounted in the bottom of the unit base. The Crestron CN-RJ11
4-Wire to RJ-11 Converter and a 12-foot interface cable are supplied to convert a
4-pin Cresnet connection on the control system to the 6-pin connection in the
touchpanel.
The following figure shows the pinout for the 6-pin RJ-11
Recommended Touchpanel Cleaning
Keep the surface of the touchscreen free of dirt, dust, or other materials that could
degrade optical properties. Long-term contact with abrasive materials can scratch the
surface that may detrimentally affect image quality.
For best cleaning results, use a clean, damp, non-abrasive cloth with any
commercially available non-ammonia glass cleaner. Surrounding plastic enclosure
may not provide a complete watertight seal. Therefore, apply cleaning solution to the
cloth rather than the surface of the touchscreen. Wipe touchscreen clean and avoid
ingress of moisture beneath panels.