Crestron
TPMC-8T
Isys i/O™ 8.4” TableTop WiFi Touchpanel
•
Checking Connection:
A yellow popup message appears when the
panel is experiencing network issues.
•
Disconnected, Trying to Reconnect…:
A red popup message appears
when the panel loses connection with the control system.
A control for popup message
Translucence
is also provided. Translucence ranges
from 25% to 100%, with a default value of 90%.
The
Default
button restores the original
Screen Position
and
Translucence
settings,
as well as enabling display of
Network
messages. A
Test Message
button lets you
see the changes to popup message position and translucence. Touch
Close
to close
the popup window.
NOTE:
The default value for
Screen Position
is
Lower Left
.
Ethernet Details
The Ethernet portion of the setup menu allows configuration of the touchpanel
settings for Ethernet communications.
The Crestron Swirl logo
at the top of the Ethernet portion of the setup menu
illuminates to indicate the status of your connection to the control system(s):
•
Green Connected
•
Yellow Network trouble
•
Orange Connected to some but not all of the control systems (listed in IP
table)
•
Red
Not connected to any control system (listed in the IP table)
Adapters
Touch
Adapters
to access the “Ethernet Setup” window. To save any changes, use
the
Save & Reboot
button on the setup menu. The Ethernet address and mask are
displayed on this screen.
NOTE:
The adapter listed in the “Ethernet Setup” window will depend on which
adapter came with your TPMC-8X. Either an Atheros or Intel PRO will be displayed,
as shown in the illustration
s
on the following page.
Operations Guide – DOC. 6567C
Isys i/O™ 8.4” TableTop WiFi Touchpanel: TPMC-8T
•
35
Содержание Isys i/O TPMC-8T
Страница 1: ...Crestron TPMC 8T Isysi O 8 4 TableTopWiFiTouchpanel Operations Guide...
Страница 4: ......