Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 5 / 28

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video
Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
•
1
iMedia Receiver/Processor with
Video: IM-RXV1 & IM-RXV3
Introduction
Features and Functions
•
Simple, affordable solution for single-display multimedia presentation
•
Models with one (IM-RXV1) or three (IM-RXV3) IM transmitter
inputs available
•
iMedia transport for fast and easy single-cable installation using
CresCAT™-IM cable
•
Supports XGA resolution up to 84 feet, and UXGA up to 34 feet over
CresCAT-IM cable
•
Receives and displays composite video signals
•
Built-in LAN, RS-232, IR, relays and digital input control ports
•
Built-in 20 Watt stereo amplifier and line-level outputs
•
Complete setup in minutes using iMedia Wizard Software
•
Built-in Web-server supports e-Control
®
2 and RoomView
®
The iMedia Transport
The iMedia transport utilizes a single CAT5e* type cable to transmit computer RGB,
video, and stereo audio signals to a single projector or plasma display. A typical
XGA signal (1024 X 768 pixels at 60Hz) can be transmitted up to 84 feet using
iMedia, while higher resolutions up to 1600 x 1200 can be handled over shorter
distances. Composite video signals can be transmitted up to 218 feet. Audio is
transmitted digitally at 20-bit, 48 kHz resolution. Control and power signals are also
contained on the same wire, eliminating the need for separate control or power
cables.
* For iMedia use CresCAT-IM cable, or quality CAT5e/CAT6 cable having a maximum delay skew
of 15ns per 100m.
iMedia Receiver
Mounted at the projector or plasma display, the IM-RXV1 and IM-RXV3 receive the
iMedia (IM) signal from up to three IM transmitters, breaking out the RGB, video,