Crestron iMedia IM-RXV1, Руководство по эксплуатации и установке

Страница: 17 / 28

Crestron IM-RXV1 & IM-RXV3 iMedia Receiver/Processor with Video
Maximum Resolution and Cable Length (Continued)
RESOLUTION REFRESH
RATE (HZ)
PIXEL
RATE
(MHZ)
PIXEL TIME
(NS)
MAX
LENGTH
(FEET)
SXGA
(1280 X 1024) 60
75
85 108.00
135.00
157.50 9.3
7.4
6.3 50.9
40.7
34.9
UXGA
(1600 X 1200) 60
70
85 162.00
189.00
229.50 6.2
5.3
4.4 34.0
29.1
24.0
COMPOSITE
VIDEO 218.5
Hardware Hookup
Mounting The IM-RXV1 & IM-RXV3 can be mounted to any surface using the included
mounting brackets. These brackets must be installed prior to mounting. Complete the
following procedure to attach the brackets to the unit. The only tool required is a #1
Phillips screwdriver.
To install the brackets:
1. There are screws that secure each side of the IM-RXV1 & IM-RXV3 top
cover. Using a #1 Phillips screwdriver, remove the screws at each corner of
the top cover. Refer to the diagram following step 3 for a detailed view.
2. Position a bracket so that its mounting hole aligns with the hole vacated by
the screws in step 1.
3. Secure the bracket to the unit with a screw from step 1, as shown in the
following diagram.
Ear Attachment
4. Repeat procedure (steps 1 through 3) for each remaining bracket.
NOTE: The MK-IM-RX mounting kit is also available for mounting the IM-RXV1
or IM-RXV3 to a pipe. Details can be found in the latest version of MK-IM-RX
Installation Guide (Doc. 6451) which is available from the Crestron website
(http://www.crestron.com/manuals).
Operations & Installation Guide – DOC. 6478 iMedia Receiver/Processor with Video: IM-RXV1 & IM-RXV3
•
13