The Crestron®
Horizon™ in-wall multiway remote controls
Horizon-style dimmers and switches. The device features the following:
l
Field replaceable rocker button (supplied), engravings available
l
The HZ-AUX must be used in conjunction with an HZ-DIMEX,
HZ-DIMUEX, or HZ-SWEX (not supplied). It cannot control a load
directly.
In the Box
1
HZ-AUX, Horizon™ In-Wall Multiway Remote
Additional Items
2
Screw, 6-32 x 1 in., Truss Head, Combo (2054883)
1
Spacer, Multi-Gang Alignment (2049924)
1
Nut, Wire, Blue (2045230)
Important Notes
CAUTION:
TO REDUCE THE RISK OF OVERHEATING AND POSSIBLE
DAMAGE TO OTHER EQUIPMENT, DO NOT INSTALL TO CONTROL A
RECEPTACLE, A MOTOR-OPERATED APPLIANCE, A FLUORESCENT
LIGHTING FIXTURE, OR A TRANSFORMER-SUPPLIED APPLIANCE.
ATTENTION:
GRADATEURS COMMANDANT UN BALLAST-AFIN DE
RÉDUIRE LE RISQUE DE SURCHAUFFE ET LA POSSIBILITÉ
D’ENDOMMAGEMENT À D’AUTRES MATÉRIELS, NE PAS INSTALLER
POUR COMMANDER UNE PRISE, UN APPAREIL D’ÉCLAIRAGE
FLUORESCENT, UN APPAREIL OPÉRÉ DE MOTEUR OU UN
APPAREIL ALIMENTÉ PAR UN TRANSFORMATEUR.
WARNING:
To avoid fire, shock, or death, turn off the power at the
circuit breaker or fuse and test that the power is off before wiring!
NOTE:
The HZ-AUX cannot be used to control a load directly. It must
be used in conjunction with an HZ-SWEX, HZ-DIMUEX, or HZ-DIMEX.
NOTE:
All 3- or 4-way switches in a multi-way circuit must be replaced
by HZ-AUX units or HZ-KPEX units with a single HZ-DIMEX,
HZ-DIMUEX, or HZ-SWEX unit installed at the load side of the multi-
way chain.
1
HZ-AUX
Quick Start
Horizon™ In-Wall, Multiway Remote