DO
GUIDE
HD-TX-301-C-E
DM Lite Multiformat Switch and Transmitter
DO
Connect the Device
Connect the device as required for the application.
Front Panel Connection
Rear Panel Connections
NOTES:
•
A power pack is included with the HD-TX-301-C-E. If a power pack is also included with
the compatible receiver, connect a power pack to either the transmitter or receiver. Do not
connect a power pack to both devices simultaneously. Power is transmitted over the cable
that connects the TO RX port on the transmitter to the FROM TX port on the receiver.
•
Cabling that connects the TO RX port to the FROM TX port is designed for intrabuilding
use only.
DO
Install the Device
Mount the device onto a flat surface or rack rail.
Mount onto a Flat Surface
Using four mounting screws (not included), mount the device onto a flat surface such as a wall.
Mount onto a Rack Rail
Mount the device onto the front or rear rail of a rack. Position either the left or right mounting flange
of the device so that the holes align with the holes in the rack. Then, secure the device to the rack
using two mounting screws (not included).
DO
Check the Box
QTY
ITEM
PART NUM.
1
Power Pack, 24 Vdc 1.25 A, 100-240 Vac
2045870
HDMI 1-2:
From HDMI
®
audio/video
sources
VGA 3:
From RGB (VGA)
or component
video source
TO RX:
To FROM TX
link input of
DM Lite receiver
AUDIO:
Unbalanced
stereo line level
audio input
24V
1.25A:
From included
power pack
SERVICE:
From TT-100
series cable caddy
