20
•
DM Lite HD(I)-MD Auto-Switchers and Extenders
Supplemental Guide – DOC. 7797D
4.
(Applicable only when Send command is set to IR) Do the following:
NOTE:
In order for IR operation to be functional, an IR file (*.ir) must be loaded to
the switcher. For information about loading an IR file, refer to "Configure IR
a.
In the IR drop-down list, select the IR signal that is to be transmitted to turn
on the output.
b.
Continue with step 5.
5.
(Applicable only when Send command is set to CEC, RS232, or IR) Do one of the
following:
•
Click Save to save the power-on settings.
•
Click Test to test the command. If the command is successful, click Save to
save the power-on settings.
Configure Analog Audio Settings
Configure analog audio settings in the Analog Audio Settings section of the Output
page.
Output Page - Analog Audio Settings
To configure analog audio settings:
1.
Mute or unmute audio by clicking the Volume button, which is represented by a
speaker icon. By default, audio is unmuted and is set to 0 dB. When audio is
muted, the Volume button displays a red circle with a slash overlapping the
speaker icon (
).
2.
(Applicable only when audio is unmuted) Adjust the volume as desired by
dragging the Volume slider to the left or to the right. The volume decreases when
the slider is dragged to the left and increases when the slider is dragged to the
right. Available values range from -80 dB to 20 dB.
Содержание HD-MD-400-C-E
Страница 1: ...DM Lite HD I MD Auto Switchers and Extenders Supplemental Guide Crestron Electronics Inc...
Страница 4: ......
