Crestron FT-TSC600 FlipTop, Руководство по эксплуатации и установке, Страница: 37 / 48

Crestron FT-TSC600 FlipTop Touch Screen Control System
Operations & Installation Guide – DOC. 7593A FlipTop Touch Screen Control System: FT-TSC600 • 33
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Apply power after all connections have been made.
When making connections to the FT-TSC600, note the following:
• Use Crestron power supplies for Crestron equipment.
• The included cable cannot be extended.
Hardware Connections for the FT-TSC600
Ground
LAN PoE:
10BASE-T / 100BASE-TX
Ethernet to LAN
COMPUTER:
To PC
AUD OUT:
To Balanced
Line Level Input
NET:
To any Cresnet
Network Device
CAUTION: Do not apply excessive pressure to the touch screen display during
handling. Doing so can crack the screen and damage the touch screen.
NOTE: Ensure the unit is properly grounded by connecting the chassis ground lug
to an earth ground (building steel).
NOTE: To prevent overheating, do not operate this product in an area that exceeds
the environmental temperature range listed in the table of specifications.