Supplemental Guide – DOC. 7861C
DMF-CI-8: DM NVX and DMCF Card Chassis
•
1
DMF-CI-8: DigitalMedia™ Chassis
for DM® NVX and DMCF Cards
Introduction
The Crestron® DMF-CI-8 is a 2-space, rack-mountable chassis designed to accommodate
and power Crestron DM® NVX and DMCF series cards. The DM NVX cards consist of the
DM-NVX-350C and DM-NVX-351C encoders/decoders. The DMCF cards consist of the
DMCF-TX-4K-SFP transmitter and the DMCF-RX-4K-SFP receiver. The DM NVX and
DMCF cards can be installed in any of the eight card slots of the chassis in any
combination. Stand-alone endpoints are also available for installation at remote
locations.
NOTE:
The DMF-CI-8 is not a DigitalMedia™ switcher.
The DMF-CI-8 provides a front panel LCD display and associated push button controls.
Menus on the front panel display allow status information about the cards and the
chassis to be viewed. In addition, the chassis and various functions of the cards can
be configured.
This guide provides the following information about the DMF-CI-8:
•
Physical description of the front and rear panels
•
LCD display operation using the front panel controls
•
Card status and configuration
•
Chassis status and configuration
For DMF-CI-8 installation information, refer to the DMF-CI-8 DO Guide (Doc. 7860) at
