Crestron DM-RX1-1G, Руководство по эксплуатации и установке

Страница: 17 / 36

Crestron DM-RX1-1G DigitalMedia™ CAT Receiver
Setup
Network Wiring
When wiring the DM network, consider the following:
NOTE: DMNet wiring and Cresnet
®
wiring are not compatible.
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results
or damage to the equipment. Use the Crestron Power Calculator to
help calculate how much power is needed for the system
(
www.crestron.com/calculators ).
•
For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable.
Refer to the latest version of the Crestron DigitalMedia Design
Guide (Doc. 4789) for complete wiring guidelines.
For more details, refer to “Check Network Wiring”, which starts on
page 24.
Supplied Hardware
The hardware supplied with the DM-RX1-1G is listed in the following
table.
Supplied Hardware for the DM-RX1-1G
DESCRIPTION PART NUMBER QUANTITY
Black - 4510566 1 Assy, Insert, with Tape
White - 4512253 1
Screw, #06-32 X 3/4", Oval,
Slot 2009684 2
Operations & Installation Guide – DOC. 6969B DM
®
CAT Receiver: DM-RX1-1G
•
13