Crestron DM-RX1-1G, Руководство по эксплуатации и установке

Страница: 16 / 36

DigitalMedia™ CAT Receiver Crestron DM-RX1-1G
2. Refer to the following table for the D and M terminal block pinouts.
D and M Terminal Block(s)
1 2 3 4 5 6 7 8
PIN # WIRE COLOR PIN # WIRE COLOR
1 Brown 5 Green
2 White/Brown 6 White/Green
3 Orange 7 Blue
4
White/Orange 8 White/Blue
3. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM
Repeaters, model DM-DR (sold separately) may be required. Refer to the latest
version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete
wiring guidelines.
4. Refer to the following table for the G B A 24 connector pinouts.
G B A 24 Terminal Block
G B A 24
PIN # SIGNAL DESCRIPTION WIRE COLOR
G Ground DC Ground Black and Ground
B DMNet- DMNet Gray
A DMNet+ DMNet Orange
24 24V DC DC Power Red
5. DMNet wiring is not compatible with Cresnet wiring. DMNet wiring cannot be
daisy chained.
6. A grounding lead is provided for connection to earth ground (building steel). This
ground connection is recommended to provide a common ground reference for
signals provided to the DM-RX1-1G, and to reduce the incidence of possible
damage to the unit from static discharge.
12
•
DM
®
CAT Receiver: DM-RX1-1G Operations & Installation Guide – DOC. 6969B