Crestron DM NVX Series Скачать руководство пользователя страница 57

Страница: 57 / 90

Product Manual – DOC. 8879C

DM-NVX-36x(C) Encoders/Decoders

•

Maximum Color Depth and Color Space Mode

Configure the maximum color depth (maximum bit depth supported by the output) and

HDMI color space mode using the web interface or SIMPL Windows.

Using the Web Interface

To configure maximum color depth and color space mode:

Click the Settings tab and then click Outputs.

In the Outputs table, click the Edit button.

In the HDMI Output Setting section:

•

Configure maximum color depth in the Max Color Depth drop-down list by

selecting the desired setting.

NOTE:

If HDR video is desired at the output, set Max Color Depth to 10-bit

mode.

•

Configure color space mode in the Color Space Mode drop-down list by

selecting the desired setting.

NOTE:

If HDR video is desired at the output, set Color Space Mode to

Force Y422 or Force Y420.

For additional information, refer to the online help of the web interface.

Содержание DM NVX Series



























































































Результаты поиска

Содержание DM NVX Series

Отзывы:

Похожие инструкции для DM NVX Series

Бренды по названию

Популярные бренды

Crestron DM NVX Series, Руководство по эксплуатации продукта

Результаты поиска

Содержание DM NVX Series

Отзывы:

Похожие инструкции для DM NVX Series

Бренды по названию

Популярные бренды