Supplemental Guide – DOC. 7718B
DM-MD8X1-4K-C and HD-MD8X1-4K: 4K Scaling Auto-Switchers
•
7
User-Selectable Output Resolution
The output resolution of the scaler is user selectable. To select the output resolution, use
the web interface or SIMPL Windows as discussed in the following sections.
Configuration Using the Web Interface
An overview of the steps necessary to select the output resolution of the scaler is as follows:
NOTE:
For detailed information, refer to the online help of the web interface.
1.
On the Main Setup page, click the INTERNAL SCALER Settings button.
The Output Configuration page for the internal scaler opens.
2.
In the Current Scaler Resolution list, click the desired setting.
3.
(Applicable only to the DM-MD8X1-4K-C and only when EDID Preferred is selected
in the Current Scaler Resolution list) In the Preferred EDID list, click the radio
button that corresponds to the preferred EDID setting.
Output Configuration Page for Internal Scaler—Current Scaler Resolution Configuration
Configuration Using SIMPL Windows
Using SIMPL Windows, set the output resolution in subslot 02 of the Outputs slot. To do so,
set the <Scaler_User_Resolution_Index> analog input join to the desired value.
NOTE:
For detailed information, refer to the SIMPL Windows help file.
