DO
GUIDE
DO
Connect the Device
Connect the rear panel of the device as required for the application.
Top View
Bottom View
DMF-TX-4K-SFP
DigitalMedia
™
SFP+ 4K Fiber Transmitter
DO
Install the Device
The Crestron
®
DMF-TX-4K-SFP can be mounted onto a flat surface or onto a rack rail.
Mounting onto a Flat Surface
Using four mounting screws (not included), mount the device onto a flat surface such as the
underside of a table.
Mounting to the Underside of a Table
Mounting onto a Rack Rail
Using two mounting screws (not included), mount the left or right mounting flange of the device
onto the front or rear rail of a rack.
Mounting onto a Rack Rail
DO
Check the Box
QTY PRODUCT
COLOR
PART NUM.
1
Cable, RJ-45 Male - DB9 Female, 6' (1.83 m)
2043246
1
Connector, 4-Pin
2003576
2
Connector, 5-Pin
2003577
1
Power Cord, 5' 10" (1.78 m)
2042043
1
Power Pack, 24 Vdc, 2.5 A, 100-240 Vac
2045873
24 Vdc from
power pack
(included)
To/from
RS-232
device
Ground
To IR
controllable
devices
To/from
serial port
on PC
(cable included)
To/from
USB port
on PC
To
HDMI
®
display
From HDMI
audio/video
sources
Balanced/
unbalanced
stereo line
level audio
input
To DM IN
port of
DigitalMedia™
SFP+ receiver
†
10BASE-T/
100BASE-TX/
1000BASE-T
Ethernet to
LAN or local
network device*
*To connect to the LAN, use either the LAN port of the DMF-TX-4K-SFP or the LAN port of the DigitalMedia SFP+
receiver (DMF-RMC-4K-SFP or DMCF-RX-4K-SFP)—do not connect the transmitter and receiver LAN ports to the
LAN simultaneously.
†
Use Crestron
®
SFP+ transceiver modules only. Refer to the SFP-10G Series DO Guide (Doc. 7862) for
additional information.
