Crestron DigitalMedia DM-NVX-350 страница 15 Скачать руководство пользователя

Страница: 15 / 96

Product Manual – DOC. 7839M

DM-NVX-35x(C) Encoders/Decoders

•



LAN 1: 8-pin RJ-45 connector, female;

100BASE-TX/1000BASE-T Ethernet port;

Green LED indicates Ethernet link status;

Amber LED indicates Ethernet activity



LAN 2: SFP port;

Accepts one Crestron SFP-1G Series SFP transceiver module;

1, 2

Green LINK LED indicates Ethernet link status;

Green ACT LED indicates Ethernet activity



HDMI OUTPUT: 19-pin HDMI Type A connector, female;

HDMI digital video/audio output (DVI compatible)



HDMI INPUTS 1

–

2: 19-pin HDMI Type A connector, female;

HDMI digital video/audio inputs (DVI and Dual-Mode DisplayPort compatible)

3, 4

Two green LEDs, each indicates sync detection at the corresponding HDMI input



AUDIO I/O: 5-pin 3.5 mm detachable terminal block;

Balanced/unbalanced stereo line-level audio input or output;

Input Impedance: 24k Ohms balanced/unbalanced;

Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;

Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;

Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced

Either LAN 1 or LAN 2 can be used as the primary LAN connection, allowing the other port to be used for

connection to a local network device or to another DM NVX device. The port that is used as the primary

LAN connection requires connection to a 1000BASE-T switch in order to stream network video.

LAN 2 can connect to a fiber-optic network using the appropriate Crestron SFP-1G transceiver module

(sold separately). Refer to the SFP-1G Series Installation Guide (Doc. 7979) for information about installing

Crestron SFP-1G Series transceiver modules.

HDMI connections require an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode

DisplayPort signal. CBL-HD-DVI interface cables are sold separately.

Device control via CEC requires integration with a Crestron 3-Series or later control system.

Содержание DigitalMedia DM-NVX-350

































































































Результаты поиска

Содержание DigitalMedia DM-NVX-350

Отзывы:

Похожие инструкции для DigitalMedia DM-NVX-350

Бренды по названию

Популярные бренды

Crestron DigitalMedia DM-NVX-350, Руководство по эксплуатации продукта

Результаты поиска

Содержание DigitalMedia DM-NVX-350

Отзывы:

Похожие инструкции для DigitalMedia DM-NVX-350

Бренды по названию

Популярные бренды