Crestron DA-1700CW, Руководство по эксплуатации и установке

Страница: 5 / 24

Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW
Docking Assembly for
STX-1700CW/CXPW:
DA-1700CW
Introduction
Functions and Features
The DA-1700CW docking assembly is wall-mounted hardware that is used to dock a
Crestron

STX-1700CW or STX-1700CXPW color touchpanel. Used with the
BB-1700CW back box (sold separately), the DA-1700CW provides operating power,
hard-wire communications with a standard Crestron remote control system (herein
referred to as the Cresnet

system), and recharges the Crestron High Performance
Rechargeable Power Pack (ST-BTPN) of the docked touchpanel.
The DA-1700CW unlatches the touchpanel electrically via the control system
program. When the touchpanel is unlatched, it snaps outward slightly, and then may
be removed by hand. The control system program defines the method of unlatching.
Provisions have also been incorporated to allow the touchpanel to be unlatched
manually.
Functional Summary
•
Docks the STX-1700CW or STX-1700CXPW
•
Enables Cresnet communication between control system and
touchpanel
•
Recharges touchpanel battery
When not docked in the DA-1700CW, the touchpanel is a handheld, RF, 2-way
wireless transceiver that communicates through an RF transceiver/gateway, (sold
separately) to the Cresnet system. The 2-way communications provide delivery of
commands to the Cresnet system and provide dynamic onscreen feedback for real-
time confirmation of commands. Up to 15 touchpanels can communicate with one
gateway.
Operations and Installation Guide - DOC. 6104A Docking Assembly for STX-1700CW/CXPW: DA-1700CW
•
1
For detailed information about the operation and programming of the touchpanels
themselves, refer to the latest version of the Operations Guide for the STX-1700CW
(Doc. 6228) or the STX-1700CXPW (Doc. 6249) available from the Crestron
website (
http://www.crestron.com/manuals ).