Crestron Electronics, Inc.
Installation Guide - DOC. 7521B
15 Volvo Drive Rockleigh, NJ 07647
(2036363)
Tel: 888.CRESTRON
11.13
Fax: 201.767.7576
Specifications subject to
www.crestron.com
change without notice.
Further Inquiries
To locate specific information or resolve questions after reviewing this guide, contact Crestron's True Blue Support at
1-888-CRESTRON [1-888-273-7876] or, for assistance within a particular geographic region, refer to the listing of
Crestron worldwide offices at www.crestron.com/offices.
To post a question about Crestron products, log onto Crestron’s Online Help at www.crestron.com/onlinehelp.
First-time users must establish a user account to fully benefit from all available features.
Future Updates
As Crestron improves functions, adds new features, and extends the capabilities of the CSA-ANT-EXTRNL-QMT50,
additional information may be made available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation revision.
Check the Crestron website periodically for manual update availability and its relevance. Updates are identified as
an “Addendum” in the Download column.
WARNING:
To avoid fire, shock, or death; turn off power at circuit breaker or fuse and test that power is off before
wiring!
NOTES:
Observe the following points.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• This product should be installed by a qualified electrician.
Crestron CSA-ANT-EXTRNL-QMT50
External Antenna for CSM-QMT50-DCEX
Installation Guide
INTRODUCTION
The Crestron
®
CSA-ANT-EXTRNL-QMT50 is an optional accessory for the
CSM-QMT50-DCEX QMT™ shade motor with infiNET EX
®
wireless communication. The
external antenna is recommended for applications where the shade is recess mounted in a
pocket, or anywhere the integrity of the wireless signal may be compromised by some
obstruction or excess distance.
The CSA-ANT-EXTRNL-QMT50 comes in white and can be painted to blend with the
surrounding decor for an inconspicuous installation. It is designed for mounting to a flat
surface outside of the pocket in which the shade is installed, or near the opening at the
bottom of the pocket. It includes an integral 8 inch (204 mm) wire lead with right-angle
MMCX coaxial connector for connection to the shade motor.
Physical Description
This section provides information on the dimensions for the CSA-ANT-EXTRNL-QMT50.
Dimensional Drawing
INSTALLATION
Follow the instructions below to wire the CSA-ANT-EXTRNL-QMT50 to a
CSM-QMT50-DCEX motor and mount to a surface.
Wiring
Plug the connector at the end of the wire lead into the 2-pin connector on the
CSM-QMT50-DCEX motor as shown in the following illustration.
Wiring CSA-ANT-EXTRNL-QMT50 to CSM-QMT50-DCEX Motor
2 in
(51 mm)
1/2 in
(12 mm)
3/4 in
(19 mm)
8 in
(204 mm)
Mounting
NOTE
: Test the signal at the mounting location before permanently mounting the
antenna.
Mount the antenna outside of the pocket or, at a minimum, near the opening of the bottom
of the pocket so that it is able to receive ample infiNET EX signal for motor control. Use the
included 3M
®
Dual Lock
®
reclosable fastener to mount the antenna to the mounting surface.
