Crestron
CPC-CAMI
Pan/Tilt Camera Head with Control Interface
Pan/Tilt Camera Head with
Control Interface: CPC-CAMI
Description
Functional Description
The CPC-CAMI is an integrated pan/tilt head and network control interface
belonging to the Crestron ProCam family of network camera control. The unit has
been designed to provide control of a remotely positioned video camera site. Control
is defined as the two-axis motion of the pan/tilt unit and the focus/zoom setting of a
camera lens.
The CPC-CAMI provides exclusive SpeedSmart™ technology to assure the fastest -
yet smoothest - camera response possible. Pulse width modulation insures high
speed resolution and the unit possesses a remarkable ability to repeat preset
positions. When connected to a Crestron control system, the unit’s “whisper-quiet”
movement of a camera/lens assembly is controlled by its own built-in network
control interface.
Jumper Boards
Four supplied jumper boards permit the support of any camera/lens assembly
requiring an input voltage in the range of +/-2.5 to +/- 12 VDC. Thus a single
CPC-CAMI with its four jumpers can control nearly any camera/lens in the industry.
Refer to the table below for exact voltage outputs for each jumper board.
NOTE:
If no jumper board is connected to the CPC-CAMI, the lens outputs are
disconnected.
Jumper Board Options
JUMPER BOARD
VOLTAGE CONFIGURATIONS
LENSES CONTROLLED
LENS A
+/- 12 VDC differential drive
Panasonic WV-LZ81/10, Canon J6x11 REA-IA-II,
Daiwa/CSI, and Cosmicar H6ZAHE-2P and
C6Z1218H2ESP-2
LENS B
+/- 8 VDC differential drive
H1020812 AMSP, Daiwa/CSI, and Computar H10Z0812M
LENS C
+/- 2.5 VDC single ended drive with lens
supplied reference (implements 2.5V to
7.5V with lens supplied center (5V))
Fujinon MD, BMD and SD series, JVC HZ-713MD,
Daiwa/CSI, and Canon KTS/KTS-A series
LENS D
+/- 6 VDC differential drive
Daiwa/CSI and Vicon M & MS series
Operations Guide - DOC. 5726A
Pan/Tilt Camera Head with Control Interface: CPC-CAMI
•
1
