Crestron CNXRMCLV, Руководство по эксплуатации

Страница: 25 / 40

Crestron CNXRMCLV Room Solution Box with Local Video
Operations Guide – DOC. 8161A Room Solution Box with Local Video: CNXRMCLV
•
21
IR Device Symbol
Slot 2: IR Receiver
This symbol is only used in systems containing an acceptable third party transmitter
(Pronto/RC5/Universal IR Remote). To include a compatible third party transmitter
as part of the program, you must first drop a wireless receiver (CNXRMIRD) from
the Wireless Receivers | Wireless Receivers (IR) folder of the
Device Library into
slot 2. Then, from the Wireless Remotes (IR) folder, drop the Pronto/RC5/Universal
IR Remote symbol onto the CNXRMIRD.
NOTE: You must use a Crestron IR receiver. Third party receivers are not supported
or compatible.
The symbol, shown below, consists of a number of outputs (presses), which
correspond to the actual buttons on the transmitter. Recall that when mapping the
buttons on the third party transmitter, a list was developed (refer to "Map the
Universal Remote" on page 16 for the actual procedure). That list needs to be
transcribed to this symbol. Match the button ID numbers from the list to the
numbered press. These outputs are the driving source for the IR devices.
Pronto/RC5/Universal Remote Symbol
Slot 3: Built-in 1 Port Digital Input
This symbol is only used to determine whether the monitor (i.e., television set) in the
room is on or off. A Crestron Room Current Sensor (CNXRMCS) or any other