Crestron CNXRMCLV, Руководство по эксплуатации

Страница: 13 / 40

Crestron CNXRMCLV Room Solution Box with Local Video
Operations Guide – DOC. 8161A Room Solution Box with Local Video: CNXRMCLV
•
9
program. Refer to “Setting the Net ID in Device Settings” on page 19 for details of
the SIMPL Windows procedure.
Refer to the note on page 26 for a
definition of Viewport.
The Net ID of the CNXRMCLV has been factory set to 42 . The Net IDs of multiple
CNXRMCLVs in the same system must be unique. Net IDs are changed from a
personal computer (PC) via the Crestron Viewport.
NOTE : For detailed information on establishing communication between the PC and
control system, refer to “Communication Settings” on page 26. If communication
cannot be established, refer to the “Troubleshooting Communications” section in the
respective Operations Guide for the control system.
Complete the following steps to change the Net ID
1. Ensure that the device requiring a Net ID change is the only unit
connected to the control system.
2. Open the Crestron Viewport.
3. From the Viewport menu, select Functions | Set Network ID . The
software checks the baud rate and then opens the "Set Network ID"
window.
4. In the "Set Network ID" window, select the device requiring a Net ID
change from the Current Network Devices text window.
5. Select the new Net ID for the device from the Choose the new network
ID for the selected device (Hex): text box.
6. Click Set ID to initiate the change. This will display the "ID command
has been sent" window.
7. In the "Command Complete" window, click OK .
8. In the Current Network Devices text window, verify the new Net ID
code.
9. In the "Set Network ID" window, click Close .
NOTE: The new Net ID code may also be verified by selecting Diagnostic | Report
Network Devices in the Viewport (alternately, select F4 ).
10. Repeat this procedure for each additional network device requiring a
Net ID change.
Mounting
Two screw holes in each bottom flange accept #6 screws (not supplied). The
CNXRMCLV can be mounted in any orientation. Mounting hole spacing dimensions
are illustrated in “Physical Description” which begins on page 3.
Hardware Hookup
The CNXRMCLV is capable of tremendous flexibility in audio and video signal
distribution. Refer to “Audio/Video Distribution” on page 10 for detailed
information. Other than making the power connection (NET) last, complete the
connections in any order.
NOTE: Refer to "Network Wiring" on page 8 when making connections to the port
labeled NET.