CNX Enhanced Ethernet Expansion Card
Crestron
Physical Views
MOUNTING
BRACKET
Front View
26-PIN DPA
CONNECTOR
Side View
Top View
LAN/DPA
PORT
2.95 in
(7.49 cm)
4.55 in
(11.56 cm)
1.13 in
(2.87 cm)
Leading Specifications
The table below provides a summary of leading specifications for the .
Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the
SPECIFICATION
DETAILS
Power Requirements
4 Watts (0.167 amps @ 24 VDC)
Network Type
10BaseT
Protocols
TCP/IP, UDP/IP, ICMP (Ping), & HTTP
SIMPL™ Windows®
Version 1.50.06 or later
1
CNMSX-AV/Pro Update File
Version 51165X.UPZ or later
2
CNRACKX/-DP Update File
Version 51165W.UPZ or later
2
Internet Explorer
Version 4.0 or later
Netscape Navigator
Version 4.5 or later
Dimensions & Weight
Height: 1.13 in (2.86 cm)
Width: 2.95 in (7.49 cm)
Depth: 4.55 in (11.56 cm)
Weight: 2.10 oz (0.06 kg)
1
The latest software versions can be obtained from the What’s New page (SIMPL
Windows and VisionTools Pro-e sections) or Downloads page (SIMPLWIN and
TOUCHPNL Libraries) of Crestron’s website (www.crestron.com). New users are
required to register in order to obtain access to the FTP site.
2
Filenames for update files have a UPZ extension and can be obtained from the What’s
New page (Control Systems Update Files section) or Downloads page (OPSYS Library)
of Crestron’s website.
As of the date of manufacture, this unit has been tested and found to comply with
specifications for CE marking.
NOTE:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
2
•
CNX Enhanced Ethernet Expansion Card:
Operations & Installation Guide – DOC. 8153A
