Crestron CNX-PAD8A, Руководство по эксплуатации

Страница: 15 / 28

Crestron CNX-PAD8A Professional Audio Distribution Processor
3. From the Viewport menu, select Functions | Set Network ID . The
software checks the baud rate and then opens the "Set Network ID"
window.
4. In the "Set Network ID" window, select the CNX-PAD8A from the
Current Network Devices text window.
5. From the Choose the new network ID for the selected device (Hex): text
box, select the new NET ID for the CNX-PAD8A.
6. Click Set ID to initiate the change. This will display the "ID command
has been sent" window.
7. In the "Command Complete" window, click OK .
8. In the Current Network Devices text window, verify the new NET ID
code.
9. In the "Set Network ID" window, click Close .
NOTE: The new NET ID code may also be verified by selecting Diagnostic |
Report Network Devices in the Viewport.
10. Repeat this procedure for each CNX-PAD8A to be added to the
network.
Programming
The CNX-PAD8A can be programmed using various Crestron tools: Crestron
Application Builder
™
(herein know as the AppBuilder) and SIMPL Windows. Each
tool requires that the user have an unequal degree of programming knowledge. The
flexibility of each tool is proportional to the degree of programming expertise
(i.e., the more flexible, the more a programmer needs to know and account for). Of
course, one can initiate programming using the easiest method (Crestron
AppBuilder) and use advance techniques that are available from SIMPL Windows to
customize the job.
Programming with the Crestron AppBuilder
Easiest method of programming
that by itself does not offer the
greatest amount of flexibility.
The Crestron AppBuilder offers automatic programming for such residential and
commercial applications as audio distribution, home theater, video conferencing, and
lighting. The interface of this tool guides you through a few basic steps for
designating rooms and specifying the control system, touchpanels, devices, and
functionality. Crestron AppBuilder room audio configurations that utilize the
CNX-PAD8A may include such scenarios as “Control/Amplification at head-end, at
room, via local display device, or via 3
rd
party surround sound processor/receiver.”
The Crestron AppBuilder then programs the system, including all touchpanel
projects and control system logic.
The figure on the next page shows simplified block diagrams of typical room audio
configurations utilizing the CNX-PAD8A.
Operations Guide – DOC. 8174 Professional Audio Distribution Processor: CNX-PAD8A
•
11