Digital Video Processor
Crestron
CNX-DVP4
Using TPS-5000/6000 as a Touchscreen Mouse
Connected via Ethernet
The advantage of this approach is that the mouse port on the CNX-DVP4 is still
available and can be used by another pointing device.
Equipment required:
•
One CNX-DVP4 Version 3.017 or higher
•
One TPS-5000/6000 panel only with RGB card V1.017
•
One DVI to RGB adapter supplied by Crestron
•
One 24 VDC 75 watt power supply for CNX-DVP4
•
One VGA Male cable to VGA Male cable
•
One RS-232 cable Crestron P/N STPK programming kit
•
Cresnet cables
Software Required
•
Simple Windows Version 2.03.11 or higher
•
VT Pro-e Version 3.0.0.6 or higher
1. In VT Pro-e create a page with a full screen RGB window.
2. In RGB window property – select the
Design
tab and select
Pad 1
or
2
.
3. From “Project Properties” select the
Pad Area
tab and select
Pad 1
or
2
.
For
Type
, enter MOUSE and for
Communication
select Ethernet and assign a
Serial Join
number to be used in SIMPL Windows. Assign a
Device ID
number. This ID number must be added to the IPT of the touchpanel.
“Project Properties” Window
4. Compile
(
F12
) the project and load the project to the touchpanel.
5. In SIMPL Windows, add the CNX-DVP4 to the project as either a master or
slave.
6. Extend the CNX-DVP4 icon to display the slots.
7. Right click on Slot 1.
Operations Guide – DOC. 8170A
88
•
Digital Video Processor: CNX-DVP4
