Crestron CNX-BIPAD8 Скачать руководство пользователя страница 29 | Manualshive

Страница: 29 / 32

Crestron CNX-BIPAD8 Скачать руководство пользователя страница 29

Crestron

CNX-BIPAD8

Professional Audio Distribution Processor

Operations Guide – DOC. 8160A

Professional Audio Distribution Processor: CNX-BIPAD8

•

25

Further Inquiries

If, after reviewing this Operations Guide for the CNX-BIPAD8, you cannot locate
specific information or have questions, please take advantage of Crestron's award
winning customer service team in your area. Dial one of the following numbers.

•

In the US and Canada, call Crestron's corporate headquarters at
1-888-CRESTRON [1-888-273-7876].

•

In Europe, call Crestron International at +32-15-50-99-50.

•

In Asia, call Crestron Asia at +852-2341-2016.

•

In Latin America, call Crestron Latin America at +5255-5093-2160.

•

In Australia and New Zealand, call Crestron Control Solutions at
+61-2-9737-8203.

Future Updates

As Crestron improves functions, adds new features, and extends the capabilities of
the CNX-BIPAD8, additional information and programming examples may be made
available as manual updates. These updates are solely electronic and serve as
intermediary supplements prior to the release of a complete technical documentation
revision.

Check the Crestron website (www.crestron.com) periodically for manual update
availability and its relevance. Updates are available from the Downloads | Product
Manuals section and are identified as an “Addendum” in the Download column.

«
...
27
28
29
30
31
...
»

Содержание CNX-BIPAD8

































Отзывы:

Нет отзывов