Crestron CNX-B12, Руководство по эксплуатации и установке

Страница: 22 / 44

Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12
18
•
Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A
NOTE: This procedure sets the NET ID for the CNX-B12 in the program
only. It does not automatically set the NET ID for the keypad itself.
SIMPL Windows automatically changes NET ID values of a device
added to a program if a duplicate device or a device with the same NET
ID already exists in the program. Always ensure that the hardware and
software settings of the NET ID match. For NET ID hardware setting
details, refer to “Identity Code” on page 8.
CNX-B12 Symbol in Programming Manager
Programming Manager is where programmers “program” a Creston
control system by assigning signals to symbols. The following graphic
shows the CNX-B12 symbol in the SIMPL Windows Programming
Manager.
CNX-B12 symbol in SIMPL Windows Programming Manager