
Crestron
CNX-AUDIO-6PAK
Six-Zone
Audio
Package
Audio Source Wiring
NOTE:
Use good quality shielded interconnects between source equipment,
CNX-PAD8, and CNAMPX-12x60 to minimize noise. Wire gauge depends on
length of run.
Refer to the audio source-wiring diagram on the next page when making audio
connections between the hardware devices of the CNX-AUDIO-6PAK and the
sources.
Advanced Wiring
If the intent is to use the CNX-AUDIO-6PAK in a configuration other than its basic
design, refer to the individual device Operations Guides when making these
"advanced" wiring connections.
Operations & Installation Guide - DOC. 8169
Six-Zone Audio Package: CNX-AUDIO-6PAK
•
5